Star cage welding machine

Star cage welding Bad welding detection, auto re-welding Welding GI wire directly no break zinc plating Multi-spot welder

Star cage welding machine

1. Weld galvanized(GI) wire direcly without damaging zinc plating

2. 25 cages/hr for 24-wire, 6m cage

3. Bad weld detection, auto re-weld

4. Linear Bearing Rail, better cage precision

5. Work with stainless steel, mild steel and galvanized steel wires, as well as different wire conditions

6. 54 groups of ring pitch(space) setting on touch screen

7. Touch screen control

8. Short pitch compensation, ensures enough space for inserting rings

9. Auto cage removal/unlocking

10. Cage pulled by step motor, ring space precision is 0.1mm; pulling speed is 0.4m/s

Input voltage: 380V(2-phase) or specified by customerPower frequency: 50/60HzPower capacity: 80KVAInstant power in sync mode: 36KVAInstant power in async(time-sharing) mode: 18KVATransformers: 2setsAir pressure: 0.6-0.8MPaAir flow: 300L/minCooling method: natural coolingWeight: about 1000KG

Features

Rails (standard 7500mm, up to 9000mm) and material shelf equipped and connected to the welding unit. The front end of the rail is adjustment-free. Good linearity can be achieved for wire cagesEquipped with auto feeding unit, no restrictions on ring spaceFour air tanks, short air route inside the machine ensures quick response of the cylinder25mm front plate resulted from one-time machining, firmly secure that the welding cylinders are on the same plane and perpendicular to the axes, thus the linearity of the cage can be ensuredStroke-adjustable cylinders increase welding speed, pre-pressing only takes 0.08sControlled by micro-computing unitTime-sharing power-on transformer reduces the burden on local electricity grid

Star cage welding machine